Loading ...
Loading ...
Loading ...
HANDLEBARS
The handlebars can be adjusted for rider preference.
WARNING
Improper adjustment of the handlebars or incorrect torquing of the adjuster
block tightening bolts can cause limited steering or loosening of the
handlebars, resulting in loss of control and serious injury or death. Follow the
adjustment procedures exactly, or see your POLARIS dealer for service.
1. Remove the upper headlight pod.
2. Loosen the four handlebar bolts.
3. Adjust the handlebar to the desired height. Be sure the handlebars do not
contact the gas tank or any other part of the machine when turned fully to the
left or right.
4. Torque the front two bolts to 14 ft-lbs +/– 10% (19 Nm +/– 10%), then torque
the rear two bolts. A gap of up to 1/8" (3 mm) will remain at the rear of the
clamp blocks.
5. Reinstall the headlight pod.
SIDE PANEL/FOOTWELL REMOVAL
1. Remove the seat before removing a side panel.
2. To remove a side panel or footwell, remove the fasteners
q
securing it to the
frame. Lift the right side panel upward while removing it to clear the shifter
knob.
136
MAINTENANCE
Loading ...
Loading ...
Loading ...