Loading ...
Loading ...
Loading ...
Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM2
Using the supplied headphone cable
You can use the headset as noise canceling headphones by connecting a device via the supplied headphone cable and
turn the headset on. The headset supports high resolution audio playback when connecting via the supplied headphone
cable and turned on.
When turning on the headset, the indicator (green) next to the NC/AMBIENT button lights up or flashes.
Hint
You can enjoy music by connecting the supplied headphone cable to the headset even when the headset is turned off. In this
case the noise canceling function is not available.
To enjoy high resolution audio music or use the noise canceling function/Ambient Sound Mode, turn the headset on.
Use the supplied plug adaptor for in-flight use when you enjoy the in-flight entertainment.
The headset turns off automatically if you disconnect the supplied headphone cable while the headset is turned on.
When an incoming call arrives, a ring tone will be heard via the headphones. Answer the call using your smartphone or mobile
phone, and talk using the microphone of the phone. You can hear the voice of the caller from the headphones.
If you disconnect the headphone cable from the smartphone or mobile phone, you can talk using the microphone and speaker of
the phone.
Note
Use the supplied headphone cable only.
Make sure you insert the plug firmly.
The BLUETOOTH function cannot be used.
You can operate the touch sensor control panel only for Quick Attention Mode. For volume, playback, pausing, etc., control with
the connected device.
The NC/AMBIENT button cannot be used when the headset is powered off.
Depending on the in-flight entertainment, the plug adaptor for in-flight use may not be used.
4-697-257-11(6) Copyright 2017 Sony Corporation
Connect a playback device to the INPUT jack with the supplied headphone cable.
Make sure you connect the L-shaped plug to the playback device.
1
65
Loading ...
Loading ...
Loading ...