Loading ...
Loading ...
Loading ...
41
the manufacturer's instructions.
Please do not use steam cleaners on the oven interiors as this may damage
electronic parts.
Ensure the cooker is cold before cleaning.
Removal of the oven door (without soft close hinges)
To allow full access to the inside of the oven for thorough cleaning, the oven door
can be removed.
- Fully open the door and insert the pins supplied into each hinge.
- While closing the door to an angle of about 30°, lift and pull so that the door
leaves the mounting. Leave pins in place.
The rivet needs to be put into the hinge before you can remove the door.
Removal of the oven door (with soft close hinges )
- Close the door to an angle of about 30°
- Lift, than close the door to an angle of about 70°
- Pull so that the door leaves the mounting.
The rivet needs to be put into the hinge before you can remove the door.
Removal of the inner glass door panes
To assist with cleaning, the inner glass door panes are removable.
- Open the door fully and insert the pms supplied into each hinge to secure the
door in an open
position.
-
Locate the stainless steel clips at the base of the door.
- Slide the clips towards the centre of the door.
- Holding the glass, lift slightly and pull towards the oven, the glass pane will
release.
- The central glass pane is revealed. This can be cleaned in situ or removed.
- To remove the central pane, remove the 4 screws and brackets.
- It is important to remember when replacing the central pane that the rubber
spacing must be replaced first.
- When replacing the inner pane, ensure the glass is print side up and the widest
border is nearest the cooker.
It is not necessary to remove the door in order to clean the glass panes.
Oven interior
To tell whether your oven has stay clean liners look at the oven walls. If the surface
is grey in colour and rough in texture then this is a stay clean liner.
If the surface is
smooth and black, this is
an enamelled surface.
Fitting the stay clean liners
Loading ...
Loading ...
Loading ...