Loading ...
Loading ...
Loading ...
39
English
DVD System Menu Options (continued)
Audio Setup Page (underlined options are the factory default settings)
Analog Output This feature enables you to set the analogue output to match
your DVD system’s playback capability.
{ Stereo } – Select this to change the channel output to
stereo that delivers sound from only the
front speakers and subwoofer.
{ Multi-channel }– Select this to enable surround sound output
from all speakers (except REAR CENTER) and the subwoofer.
{ 6.1 Multi-channel }–Select this to enable surround sound
output from all speakers and the subwoofer.
HDMI Audio For HDMI connections, you are able to select the HDMI audio
output selections. The available options will be displayed once
you have connected the HDMI device. (see page 19).
It may take a while for the DVD system and the input
device to communicate and initialise.
{ Off } – Select this to switch off HDMI audio output.
{ All } – Select this if you have connected the DVD
system to a multichannel decoder/receiver.
{ PCM Only } – Select this only if your HDMI TV or receiver
is not capable of decoding multichannel audio.
Speaker Setup This feature allows you to to optimise the sound according to
your surroundings and setup.
{ Speakers Volume } – Access the speakers level setup menu.
See “Step 5: Setting the speakers’ channels”
{ Speakers Delay } – Access the speakers distance setup menu.
See “Step 5: Setting the speakers’ channels”
CD Upsampling This feature enables you to convert your music CD to a higher
sampling rate using sophisticated digital signal processing for
better sound quality. If you have activated the CD upsampling
feature, the system will automatically switch to stereo mode.
Note: If you press SURR. button on the remote control to
select multichannel mode, it will disable the CD upsampling
feature.
Loading ...
Loading ...
Loading ...