Loading ...
Loading ...
Loading ...
96
Troubleshooting
Adaptive Cruise control cannot be set.
Did you remember to press the (CRUISE) switch?
If you have not pressed the (CRUISE) switch, (Adaptive Cruise
Control) will not be shown.
Is EyeSight operation temporarily stopped?
When EyeSight is temporarily stopped, is displayed on the multi information
display.
Set cruise control again after the reason for the temporary stop has been cor-
rected.
Is displayed?
Cruise control cannot be set when is not displayed. Set cruise control when
is displayed.
is not displayed.
Are the requirements for setting cruise control met?
In any of the following cases, will not be displayed.
The brake pedal is depressed.
The vehicle speed is not between approximately 0 MPH (0 km/h) and 90
MPH (145 km/h) (when Adaptive Cruise Control is operating).
The vehicle speed is not between approximately 25 MPH (40 km/h) and 90
MPH (145 km/h) (when Conventional Cruise Control is operating).
The combination meter indicates a position other than . (The select
lever or paddle shift switches are manually operated.)
The driver’s seatbelt is unfastened.
Any door is opened (except the rear gate/trunk).
The electronic parking brake is applied (The brake system warning light is
illuminated or flashing.)
*
.
The vehicle is on a steep grade.
The steering wheel is turned significantly in either direction.
When Vehicle Dynamics Control is in the OFF mode ( (Vehicle
Dynamics Control OFF indicator light) in the combination meter illumi-
nates, and (the traction mode indicator light) turns off)
- The READY indicator illuminates when the Vehicle Dynamics Control
OFF switch is pressed to select the normal mode or traction mode.
*For details of how to release the Electronic Parking Brake, refer to the
Owner’s Manual for your vehicle.
D
B1272BE-A.book 96 ページ ２０１６年２月１７日 水曜日 午前１１時４２分
Loading ...
Loading ...
Loading ...