Loading ...
Loading ...
Loading ...
Lane Keep Assist
61
Press the (Lane Keep Assist) switch once again to turn it off, and “ ” (Lane Keep
Assist indicator) is turned off on the EyeSight display area.
The Lane Departure Prevention Function goes into the standby status, and the lane indica-
tor illuminates when all of the following conditions are met.
The vehicle speed is between approximately 40 MPH (65 km/h) and 90 MPH (145 km/h).
The system is detecting the lane markings.
The driver is holding the steering wheel.
When driving on a road that has a lane width that is between approximately 10 ft (3 m)
and 15 ft (4.5 m).
When driving on a straight road or gentle curve.
When driving near the center of a lane.
When the vehicle is about to depart from the lane, Lane Departure Prevention Function
starts to operate and “ ” (Lane Keep Assist indicator) illuminates in green while it is
operating.
NOTE
If you just lightly put your hands on the steering wheel for a certain period
of time or if you do not operate the steering wheel, the function will auto-
matically be canceled. (“ ” (Lane Keep Assist indicator) illuminates in
white again.)
Lane Departure Prevention Function operates when the system deter-
mines that the vehicle will depart from the lane if you continue to drive in
the same manner. Therefore, it operates at an earlier timing than Lane
Departure Warning (
Refer to page 70) (it may depend on the surround-
ing environment and road condition).
The lane indicator in the standby status and in operation may illuminate
only on the left side or right side.
MPG
miles
MPG
miles
MPG
miles
S01898
Lane Keep
Assist
indicator
(white)
Turned on Standby status In operation
(white) (green)
B1272BE-A.book 61 ページ ２０１６年２月１７日 水曜日 午前１１時４２分
Loading ...
Loading ...
Loading ...