Loading ...
Loading ...
Loading ...
19
ENGLISH
GENERAL INSTRUCTIONS
To Attach
1. Turn the speed control to OFF.
2. Unplug mixer or disconnect power.
3. Loosen the attachment knob by turning it counterclockwise, and
remove the attachment hub cover or flip up hinged hub cover.
4. Insert the attachment shaft housing into the attachment hub, making
certain the attachment power shaft fits into the square attachment
hub socket. It may be necessary to rotate the attachment back and
forth. When the attachment is in proper position, the pin on the
attachment will fit into the notch on the hub rim.
5. Tighten the attachment knob by turning it clockwise until the
attachment is completely secured to mixer.
6. Plug into a grounded 3 prong outlet.
To Remove
1. Turn the speed control to OFF.
2. Unplug mixer or disconnect power.
3. Loosen the attachment knob by turning it counterclockwise. Rotate
the attachment slightly back and forth while pulling it out.
4. Replace the attachment hub cover. Tighten attachment knob by
turning it clockwise.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
WARNING
Loading ...
Loading ...
Loading ...