Loading ...
Loading ...
Loading ...
47
PROGRAMMING MODE - SETUP MODE
NOTE
• Top spin speed
• If you select 800 or below, the final spin time will be reduced by 9minutes
• If you select 1150, 900 rpm, the final spin time is fixed by 13 minutes
0: 1150 rpm
1: 900 rpm
2: 800 rpm
3: 600 rpm
4: 400 rpm
Entering set up mode.
You will see LqC1
Button Display
Press the
WHITES
button.
Press the
COLORS
or the
DELICATES
button until appears in the display.
Press the
START
button.
Press the
COLORS
or the
DELICATES
button until appears in the display.
Press the
START
button.
Display previous top spin speed.
Press
COLORS(+)
or
DELICATES(-)
button to select top spin speed. (0~4)
Press the
START
button.
The machine sets up the top spin speed, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• OPL type – Push “WHITES” + “DELICATES” and the ‘3’.
18. Top spin speed – final spin time depends on RPM
Loading ...
Loading ...
Loading ...