Philips HTS2511/12 5.1 Home Theatre

User Manual - Page 19

For HTS2511/12.

PDF File Manual, 25 pages, Read Online | Download pdf file

HTS2511/12 photo
Loading ...
Loading ...
Loading ...
17
English
EN
Subwoofer
Output power: 50 W RMS (30% THD)
Impedance: 8 ohm
Speaker drivers: 133 mm (5.25") woofer
Dimensions (WxHxD): 160 x 267.5 x 265
mm
Weight: 2.61 kg
Speakers
Center speaker:
Output power: 50 W RMS (30% THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 70 mm (2.75") woofer
Dimensions (WxHxD): 84.5 x 89 x 89 mm
Weight: 0.27 kg
Front/Rear speaker:
Output power: 4 x 50 W RMS (30% THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 70 mm (2.75") woofer
Dimensions (WxHxD): 84.5 x 89 x 89mm
Weight: 0.25-0.29 kg/each
Remote control batteries
2 x AAA-R03-1.5 V
Laser
Type: Semiconductor laser GaAIAs (CD)
Wave length: 645 - 665 nm (DVD), 770 - 800
nm (CD)
Output power: 6 mW (DVD), 7 mW (VCD/
CD)
Beam divergence: 60 degrees.
8 Troubleshooting
Warning
Risk of electric shock. Never remove the casing
of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on the home theater do not work.
Disconnect the home theater from the power
supply for a few minutes, then reconnect.
Picture
No picture.
Make sure that the TV is switched to the
correct source for the home theater.
If this happens when you change the
TV system, press
to open the disc
compartment, and then 439 on the remote
control to restore the default TV system.
Sound
No sound from home theater speakers.
Connect the audio cable from your home
theater to your TV or other devices (see
'Connect audio from TV and other devices'
on page 8).
Reset your home theater to its factory settings
(see 'Restore default settings' on page 14),
then switch it off and switch on again.
On your home theater, press SOURCE
repeatedly to select the correct audio input.
Distorted sound or echo.
If you play audio from the TV through the
home theater, make sure that the TV is muted.
Audio and video are not synchronized.
1) Press and hold AUDIO SYNC. 2) Press
the Navigation buttons within 5 seconds to
synchronize the audio with the video.
Loading ...
Loading ...
Loading ...