Loading ...
Loading ...
Loading ...
- The slave unit can be set as A/B/C.
• Check the communication channel:
- If the master unit and slave unit(s) are set to a different channel, set them to
the same channel. (Page 32)
• Position the camera and flashes:
- Position the camera and flashes as the picture shows. (Page 39-41)
• Check the flash operation:
- Press the master unit’s Test Button < >.
- Then, the slave unit will fire. If not, adjust the slave unit’s angle toward the
master unit and distance from the master unit.
The slave unit might be out of order or fire an unwanted flash due to the
nearby wifi routers or other 2.4G equipments. If in this case, please adjust the
flash’s channel or turn off the 2.4G equipments.
35
Loading ...
Loading ...
Loading ...