Loading ...
Loading ...
Loading ...
C
RC
RH
W1
W2
AC+
AC-
RT+
RT-
S
G
Y1
Y2
O/B
1.Wire the NTK100 Outdoor Sensor to the RT+/RT- terminals on the thermostat. If the lead wire provided with
the NTC-100K is not long enough, run cable to a hole at the selected NTC-10Klocation.Color-coded,18-gauge
thermostatwireisrecom-mended. ForanexampleofgeneralwiringoftheNTC-100K,seeFig.2.Pigtailwiring
canbeused.
2.MounttheNTC-100Kinitsmountingclip.
3.Plugwiringholeusingnonhardeningcaulkorputty.
Fig.1. Typical locations for outdoor sensor.
Fig. 2. Wiring diagram for the NTC-100K
Outdoor Sensor to the thermostat.
Wiring must comply with applicable codes, ordinances and regulations.
WIRING HOLE
THROUGH
STRUCTURE
NTC-100K
1
Use appropriate mounting means for the type of structure.
1
2
2
3
Plug wiring hole with non- hardening caulk or putty.
RT+/RT- terminal location varies with model.
Optional sensor
SASWELL NTC 100K Room Sensor With 3 Meter Wiring
*Used for outdoor temperature detection when there is water pump
protection.
5756
3
A1