Loading ...
Loading ...
Loading ...
2120
Configuration Menu
The configuration menu setting :
1.In the state of shutdown,long press menu button
“ ”for 5s to enter the configuration parameter
programming setting.
2.Press “ ”or “ ”to select the configuration parameter +
-
setting,then press “ ”to save and switch to the next
item setting.
3.After all the parameters are set up, press power
button “ ”exit the setting and return to the OFF stage.
1.The thermostat will exit the configuration parameter setting automatically
and return to the shutdown state if there is no any operation whin 30s.
2.Restore default setting: during setup, long press “ ”and “ ”for more than+ -
5s until the screen shows “ ”and the “ ”flash 3times.
System type option(SYS)
Parameter options:(CO1,CO2,HE1,HE2,HC1,HC2,HP1,HP2,HPA)
CO1:1 cool conventional CO2：2 cool conventional
HE1：1 heat conventional HE2：2 heat conventional
HC1: 1 heat/1 cool conventional HC2: 2 heat/2 cool conventional
H 1: 1 compressor heat pump,1-AUX
HP2: 2 compressors or 2 speed compressor heat pump,1-AUX
Factory default: HC1
HPA: 2 compressors or 2 speed compressor heat pump, 2-AUX
P
A1
Loading ...
Loading ...
Loading ...