Loading ...
Loading ...
Loading ...
en Hood connection
32
eHood connection
Ho od connect i on
You can connect this appliance to a suitable extractor
hood and control the functions of the hood via your
hob.
There are various options for connecting the appliances
together:
Home Connect
Two appliances can be connected using the Home
Connect app provided that both of them are Home
Connect-compatible.
Observe the supplied Home Connect documents for
this.
Connecting appliances directly
If the appliance is directly connected to a cooker hood,
connection to the home network is no longer possible.
The appliance functions in the same way as a hob with
no network connection. The hob can always be
operated via the control panel.
Connecting appliances via the home network
If the appliances are connected to each other via your
home network, both the hood controls and Home
Connect can be used to operate the hob.
Notes
■ Make sure you follow the safety instructions in the
instruction manual for your extractor hood and that
these are also observed when operating the
appliance via the hood controls on the
hob.~ "Important safety information" on page 5
■ Using the controls on the extractor hood always
takes priority. It is not possible to use the hood
controls on the hob during this time.
■ In networked standby mode, your appliance requires
max. 2 W.
Setting up
Both the hob and the extractor hood must be switched
on before you can connect them to each other.
To do this, refer to the section entitled "Connecting to
the hob" in the instruction manual for your extractor
hood.
Connecting directly
If you connect your hob directly to the extractor hood, it
cannot be connected to the home network as well and
you will not be able to use Home Connect any longer.
1. Open the basic settings.
2. Touch the U symbol repeatedly until the ™‚‡
setting appears.
‹ lights up in the cooking position display.
3. Set the value to ‚ using the twist knob.
‚ lights up in the cooking position display.
4. Start the connection to the extractor hood within the
next 2 minutes.
The hob is connected to the extractor hood when the
„ value appears on the cooking position display. The
symbols for the hood controls on the hob are displayed
on the hob's control panel.
Connecting via your home network
You require a router that has WPS functionality.
You require access to your router.If you do not have
this, follow the steps for "Direct connection".
First of all make sure that the extractor hood is in the
home network.
1. Open the basic settings.
2. Touch the U symbol repeatedly until the ™‚‡
setting appears.
‹ lights up in the cooking position display.
3. Set the value to ‚ using the twist knob.
‚ will flash on the cooking position display.
4. Press the WPS button on the router within the next
2 minutes.
When the connection to the home network has been
established, the hob automatically connects to the
extractor hood.
5. Connect to the extractor hood.
Loading ...
Loading ...
Loading ...