Loading ...
Loading ...
Loading ...
en Home Connect
30
Notes
■ The •’ƒ setting is only displayed if the appliance is
connected to the home network.
■ The •’„ setting is only displayed if the appliance
has once connected to a network.
■ The •’† setting is only displayed if an update is
available.
■ The •’‡ setting is only displayed if Customer
Service is attempting to connect to the appliance.
You can end this at any time after granting access.
■ The •’ˆ and •’‰ settings are only displayed if
there is a connection to WLAN.
Deactivating WLAN
If WLAN is activated, you can use the Home Connect
functions.
Note: In networked standby mode, your appliance
requires max. 2 W.
1. Touch the . symbol for 3 seconds.
Product information will be displayed.
2. Touch the U symbol repeatedly until the
•’„ setting appears.
‚ lights up in the cooking position display.
3. Set the value to ‹ using the twist knob.
WLAN is deactivated and the D symbol on the control
panel goes out.
Disconnecting from the network
Di s connec t i ng from the net wor k
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
1. Touch the . symbol for 3 seconds.
Product information will be displayed.
2. Touch the U symbol repeatedly until the
•’‚ setting appears.
„ lights up in the cooking position display.
3. Set the value to ‹ using the twist knob.
The appliance is disconnected from the home network
and the D symbol on the control panel goes out.
Connecting to the network
Connect i ng to the net wor k
1. Touch the . symbol for 3 seconds.
Product information will be displayed.
2. Touch the U symbol repeatedly until the
•’‚ setting appears.
‹ lights up in the cooking position display.
3. Using the twist knob,
set the "Connect automatically" ‚ value or
the "Connect manually" ƒ value.
4. Follow the instructions in the section entitled
"Automatic registration in the home network" or
"Manual registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
■ The appliance must be connected to the network.
■ The app must be open and be set up.
■ There is a direct connection to an extractor hood,
first disconnect the hob from the home network and
start the connection again.
•’‡
Remote access by Customer Service
‹
Not permitted.
‚
Permitted.
•’ˆ
WLAN signal strength
‹
Not connected to home network (WLAN).
‚
Signal strength 1 (poor)
ƒ
Signal strength 2 (moderate)
„
Signal strength 3 (good)
•’‰
Connection to Home Connect server
‹
Not connected.
‚
Connected.
Symbol Function
* Basic setting
Loading ...
Loading ...
Loading ...