Loading ...
Loading ...
Loading ...
30
EN
Smart Diagnosis
This function provides useful information for
diagnosing and solving issues with the appliance
based on the pattern of use.
Settings
Various functions are available.
Push Alert
This function is to notify the status notification so
that the user can recognize the appliance status.
The notifications are triggered even if the LG ThinQ
application is off.
NOTE
• If you change your wireless router, internet
service provider, or password, delete the
registered appliance from the LG ThinQ
application and register it again.
• The application is subject to change for
appliance improvement purposes without notice
to users.
• Functions may vary by model.
Using the Appliance Remotely
Remote Start
Use a smartphone to control your appliance
remotely. You can also monitor your cycle operation
so you know how much time is left in the cycle.
Using this function
1
Press the Power button.
2
Put the laundry into the drum.
3
Press and hold Remote Start button for 3
seconds to enable this function.
4
Start a cycle from the LG ThinQ application on
your smartphone.
NOTE
• Once this function is enabled, you can only
start a cycle from the LG ThinQ smartphone
application. If the cycle is not started, the
appliance will wait to start the cycle until it is
turned off remotely from the application or this
function is disabled.
• When this function is turned on, the door is
automatically locked.
Disabling this function manually
When this function is activated, press and hold
Remote Start button for 3 seconds to disable this
function. This function must be turned off, so that
the appliance can be used manually.
Download Cycle
Download a new and special cycle that is not
included in the basic cycles on the appliance. A
variety of specialty cycles specific to the appliance
can be downloaded to the successfully registered
appliances. Only one cycle can be stored on the
appliance at any one time. Once cycle download is
completed in the appliance, the product keeps the
downloaded cycle until a new cycle is downloaded.
Standby Power Consumption
Standby power consumption 0.5 W
Network standby power consumption 2.0 W
The period of time after which the
power management function, or
a similar function, switches the
equipment automatically into standby
and/or off mode and/or the condition
providing networked standby
20 min.
RF Radiation Exposure Statement
This equipment shall be installed and used at a
minimum distance of 20 cm from the human body.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
Loading ...
Loading ...
Loading ...