Loading ...
Loading ...
Loading ...
27
EN
in less than an hour, which saves water and energy.
(based on a 5kg load)
1
Press the Power button.
2
Select a washing programme.
3
Press the Turbo Clean button.
4
Press the Start/Pause button.
CAUTION
• When adding the laundry, ensure the load is
completely within the drum before closing the
door. If the laundry is caught in the door seal or
door latch, the door gasket may get damaged. It
may cause water leakage and malfunctions.
• Forcing the door open will cause damage to
parts and create safety hazards.
• If you open the door of drum whilst there is
excessive suddsing, water may leak and cause
damage to the flooring.
Rinse l
You can select an additional Rinse by pressing the
Rinse+ button. This option is recommended for
people with detergent allergies.
Rinse+ G
This option is used to add an additional rinse to the
wash cycle.
Pre Wash
This option is recommended when washing a
heavily soiled load.
1
Press the Power button.
2
Select a washing programme.
3
Press the Pre Wash button.
4
Press the Start/Pause button.
Intensive o
You can use this option to wash heavily soiled
laundry.
1
Press the Power button.
2
Select a washing programme.
3
Press the Intensive button for 3 seconds.
4
Press the Start/Pause button.
Delay End
You can set this function so that the appliance starts
automatically and finishes after a specified time
interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Delay End button to set a required
time.
4
Press the Start/Pause button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• To cancel the function, the Power button should
be pressed.
• Avoid using liquid detergent for this function.
Wi-Fi f
When WLAN is connected, the Wi-Fi icon on the
control panel is lit.
Add Item
You can use this option in order to add or remove
the laundry after the washing programme has
started.
1
Press the Add Item button when the LED is
turned on. If the LED is not illuminated, the
Add item opportunity time has expired and the
function will not operate.
Loading ...
Loading ...
Loading ...