Lynx L700PSFR-LP Professional 42" Sedona Liquid Propane Freestanding Grill L700PSFRLP

User Manual - Page 10

For L700PSFR-LP.

PDF File Manual, 40 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
10
|
SEDONA CARE & USE/INSTALLATION
The grill is factory set to use either propane (LP) or natural
gas (NAT). It is critical that the gas you use matches that
which the grill
was set up for.
You can verify that
by checking the
rating plate.
The rating plate
is located in one
or more of the
following places:
Attached to the underside of the drip tray
On the heat shield behind the front panel
By carefully following the uncrating and unpacking steps,
you will improve the customer’s first experience.
CRATE & CARTON
HOW TO REMOVE THE CARTON
1. Cut the main strap holding the grill to the pallet.
2. Remove the straps at the bottom of the carton.
3. Lift off the carton. There is a pallet over the grill for
hood protection.
4. With assistance, remove the grill from the pallet and
place into desired location.
INTERIOR PACKING
Sturdy zip-ties and straps are used to ensure your grill
arrives at your home in the same condition that it left our
factory. BE SURE YOU HAVE REMOVED ALL ZIP-TIES
BEFORE USING YOUR GRILL.
Remove the white accessory box and packing, the grill
racks, and remove any loose items from the firebox.
Carefully cut the zip-ties securing the warming rack and
rotisserie spit rod(if equipped).
Make sure you remember to remove the zip-ties on the
burners
On ProSear™ models, cut and remove zip-ties from the
burner partition on the left side of the ProSear™ burner.
Ensure that all burners are properly seated on the burner
valve orifice and sitting level with the legs in the frame
slots and no side-to-side movement.
UNPACKING AND ASSEMBLY
EXCESSIVE WEIGHT HAZARD!
Use two or more people to move or install this unit.
Failure to follow this instruction can result in back or
other personal injuries.
WARNING
Never connect a gas line directly to the grill. A
pressure regulator must be installed on all gas
equipment. All local codes require it and Lynx supplies
the correct regulator with your grill. Removing or
failing to install the pressure regulator can result
in fire and serious personal injury and will void the
warranty.
WARNING
GAS CONNECTIONS
The Rating plate lists serial numbers, model numbers
and gas type. This one is underneath the drip tray.
Loading ...
Loading ...
Loading ...