Loading ...
Loading ...
Loading ...
7EN
Positioning the
dehumidier
To increase the dehumidifying
eectiveness, position the dehumidier
in a location that can draw the most air.
Note
• When the dehumidier is operating,
do not open exterior doors or
windows.
3 Getting started
Installing the lter
Note
• Make sure that the appliance is
unplugged before installing the
lter.
Before using the appliance, remove all
packaging materials from the lter and
place the lter into the appliance as
described as follows.
1 Pull the top part of the rear panel to
remove it from the appliance
(g.c).
2 Take out the HEPA lter and the
pre-lter (g.d).
3 Remove all packaging materials
from the HEPA lter (g.e).
4 Place the HEPA lter into the
dehumidier and then the pre-lter
(g.f).
Note
• Make sure that the HEPA lter and
the pre-lter are properly attached
to the dehumidier.
5 Reattach the rear cover by pressing
the bottom part of the rear cover
onto the appliance rst (1). Then,
gently push the rear cover against
the body of the appliance (2)
(g.g).
6 Wash your hands thoroughly after
installing lters.
Loading ...
Loading ...
Loading ...