Loading ...
Loading ...
Loading ...
14 EN
7 Replacing the
HEPA filter
HEPA lter replacement
indicator
This dehumidier is equipped with a
HEPA lter replacement indicator to
make sure that the air lter is in optimal
condition when the dehumidier is
operating. When the HEPA lter needs
to be replaced, the lter replacement
alert displays on the screen.
If the HEPA lter is not replaced in
14 days, the dehumidier will stop
operating and automatically lock.
You need to replace the HEPA lter
immediately.
Replacing the HEPA lter
Note
• The HEPA lter is not washable nor
reusable.
• Always turn o the dehumidier and
unplug from the electrical outlet
before replacing the HEPA lter.
• Do not clean the HEPA lter with a
vacuum.
Replace the HEPA lter when A5 and
display on the screen.
1 Switch o the dehumidier and
unplug from the wall outlet.
2 Take out the used HEPA lter
according to the lter alert light
status displayed on the screen.
Discard used lters (g.‡).
Cleaning the air quality
sensor
Clean the air quality sensor every
2 months for optimal functioning of the
dehumidier.
Note
• If the humidity level in the room
is very high, condensation may
develop on the air quality sensor
and the air quality light may indicate
a more poor air quality even though
the air quality is actually good. If this
occurs, clean the air quality sensor
or use the dehumidier on a manual
speed setting.
• If the dehumidier is used in a dusty
environment, it may need to be
cleaned more often.
1 Switch o the dehumidier and
unplug from the wall outlet.
2 Clean the air quality sensor inlet and
outlet with a soft brush (g.ƒ).
3 Remove the air quality sensor cover
(g.„).
4 Clean the air quality sensor, the
dust inlet and the dust outlet with a
damp cotton swab (g.…).
5 Dry all parts thoroughly with a dry
cotton swab.
6 Reattach the air quality sensor cover
(g.†).
Loading ...
Loading ...
Loading ...