Loading ...
Loading ...
Loading ...
13EN
5 Allow the pre-lter to air dry
thoroughly before placing back in
the dehumidier.
Note
• To optimize the lifetime of the
pre-lter, make sure it dries
completely after cleaning.
• Wash your hands after handling the
lter.
6 Put the pre-lter back into the
appliance (g.‚).
7 Reattach the rear panel by pressing
the bottom part of the rear panel
onto the appliance rst (1). Then,
gently push the panel against the
body of the appliance (2) (g.g).
8 Put the plug of the dehumidier in
the wall outlet.
9 Touch and hold the timer button
for 3 seconds to reset the pre-lter.
10 Wash your hands thoroughly after
cleaning the lter.
Cleaning the water tank
Clean the water tank every day to keep
it clean.
1 Switch o the dehumidier and
unplug from the electrical outlet.
2 Remove the water tank from the
dehumidier (g.v).
3 Fill the water tank for 1/3 with water
(g.~).
4 Add some mild washing-up liquid
to the water in the water tank.
5 Wash the water tank under a
running tap water, and clean the
insides of it with a soft clean cloth
(g.).
6 Wipe the outside of the water tank
dry with a clean cloth (g.x).
7 Put the water tank back into the
dehumidier (g.y).
Cleaning the pre-lter
Clean the pre-lter when F0 and are
displayed on the screen.
Note
• The pre-lter is washable and
vacuum cleanable.
1 Switch o the dehumidier and
unplug from the electrical outlet.
2 Hold the dehumidier and pull the
top part of the rear cover towards
you (g.c).
3 Detach the pre-lter from the
appliance (g.€).
4 If the pre-lter is very dirty, use a
soft brush to brush away the dust.
Wash the pre-lter under a running
tap water (g.).
Loading ...
Loading ...
Loading ...