Loading ...
Loading ...
Loading ...
15
ENGLISH
Double Quantity Factor Editing
Feature Key Entry Display Remark
Double
Quantity
Factor
Edit
Hold down
CANCEL
( )
and then
( )
pad.
Hold down for 2 sec.
Code No.
After 1 sec, default value
shows in the display window.
(Input desired
factor value.)
1.00 ~ 9.99 available (Change
the factor if required.)
START
( )
If you don’t want to change
more, press CANCEL to exit
the editing mode.
New Code No.
Skip this step if not
necessary.
(Input desired
factor value.)
Skip this step if not
necessary.
START
( )
Skip this step if not
necessary.
CANCEL
( )
(Mode cancel) This exits the editing mode.
CONTROLLING BEEP TONE
You can select the beep tone you require. There are 4 sound levels
available.
Hold down CANCEL ( ) and then press NUMBER
0 pad. Hold
together for 2 seconds.
Result : Beep tone is changed to one level
higher than current one.
Beep tone 0 does not make beep sound.
Settings are circulating whenever you press the hidden keys in the
following order.
Snd 0 g Snd 1 g Snd 2 g Snd 3 g Snd 0 (No sound)
Default tone is Snd 2.
PROGRAMMING AIR FILTER CLEAN TIME
When the air filter check indicator (FILTER) appears in the display window
after a certain time of use, you should clean the air filter according to the
instructions “Cleaning the Air Filter” on page 16 in this booklet. Then follow
the procedure as below if you want to change the air filter clean time.
1. Hold down PROGRAM LOCK (
) and then
press NUMBER 3 pad. Hold together for 2
seconds.
Result : The display will show the length of
time in hours between cleaning the
air filter you have programmed in or the original time preset
by the manufacturer.
Default clean time is 500 hours in terms of pure oscillating time, not the
continuity time.
2. Press NUMBER pads to set the desired clean
time.
You can set up to 999 hours.
3. Hold down PROGRAM LOCK (
) and then
press NUMBER 3 pad.
Hold together for 2 seconds in order to save the
new value.
This completes the programming of the air filter
clean time.
4. Press CANCEL (
) pad to return to cooking
mode.
After the clean time has expired, you should clean the air filter. See page
17.
CM1529_XEU_04030A-03_EN.indd 15 2017-08-24 12:55:28
Loading ...
Loading ...
Loading ...