Loading ...
Loading ...
Loading ...
5
N
0
5101 STREAMING SACD PLAYER/DAC / QUICK START GUIDE
CONNECTIONS
IR Input Connector:
This connector accepts IR (infrared)
control signals (RC5). See www.marklevinson.com for IR
code data.
NOTE:
• The remote control input requires a mono 3.5mm jack,
with the tip active and the sleeve grounded.
• The remote control signals must be in modulated RC5
format (at 36kHz), with a voltage level of between 5V
and 12V.
• The tip is the modulated signal, while the sleeve is the
ground.
Sleeve
Tip
RS232 Port:
This DB9F connector provides serial control
through a standard RS232 protocol. See www.marklevinson.
com for RS232 code protocol.
Trigger Input Connector:
This 3.5mm tip/sleeve connector
can be connected to the trigger output of another system
component or control system that supplies a trigger voltage.
Whenever the units detects a voltage between 5V and 12V
DC at this connection it will turn ON. When the trigger signal
at this connection ceases the
N
0
5101
will enter the Standby
mode. (See illustration below.)
AC Mains Connector:
This connector provides AC power
to the
N
0
5101
when the supplied power cord is connected
from it to an AC electrical outlet. This should be the LAST
connection you make in the hookup process.
We recommend that you unplug the unit from the AC wall outlet
during lightning storms and extended periods of non-use.
Network:
Ethernet cable can be used to connect the
N
0
5101
to
a router or switch on your home network, enabling playback
of audio stored on your computer or NAS device.
NOTE: Connecting an Ethernet cable will disable the
wireless function.
Wireless connection is also available, and may be configured
through the settings menu.
The
N
0
5101
can also be controlled by a home automation
system, using external commands.
Please visit www.marklevinson.com for further information.
Loading ...
Loading ...
Loading ...