Loading ...
Loading ...
Loading ...
RAPID CHANGE WEIGHT SYSTEMS
RAPID CHANGE
WEIGHT SYSTEMS
www.mxselect.com
SELECT
4
CORRECT SPACING CORRECT SPACING
Weight plates have a thin gap
but don’t move freely
CRADLE SPACING TOO WIDE
Weight plates move freely
when in Cradle
CRADLE SPACING TOO CLOSE
Cant remove weights and
selector dial won’t turn
STEPS TO RESOLVE THE FOLLOWING
+ Selector dial will not push down and lock into place.
+ Selector dial feels tight or will not turn easily.
+ Extra weight plate sticks when the MX Dumbbell Handset is removed from Cradle.
+ Weight plates are too widely spaced or too closely spaced.
FOR SMOOTH & ACCURATE WEIGHT PLATE SELECTION
MX DUMBBELL ADJUSTMENT GUIDE
Adjustment bolts
in slotted holes
IF CRADLE SPACING TOO WIDE
IF CRADLE SPACING TOO TIGHT
Push the floating cradle end inwards, closing the gap between the plates.
Tighten bolts and test on all dial settings. If not correct, repeat adjustment steps.
Move apart floating cradle end outwards, opening a slight gap between the plates.
Tighten bolts and test on all dial settings. If not correct, repeat adjustment steps.
With the MX Dumbbell Handset still in Cradle, locate adjustments bolts in the slots underneath Cradle.
Using a M4 Allen Key loosen the 4 Adjustment Bolts at one end of the MX Dumbbell Cradle just
enough to allow you to move the Cradle as required.
ADJUSTMENT SLOTS
STEP ONE
STEP TWO
M4 ALLEN KEY