Loading ...
Loading ...
Loading ...
11
This chapter shows you how to create a
wireless connection to a home network
with automatic IP address.
1 Ensure that your network name and
network password or encryption key are
available.
Some Internet service providers (ISP)
require
the use of a proxy server.
2 Turn on your wireless access point or
wireless router with broadband Internet.
3 Turn on the WAC7500.
4 On the WAC7500, press MENU .
5 Select [Settings] > [Network] >
[Wireless] and conrm.
6 Select the network from the list in the
display.
Enter encryption key (if required)
with
the remote control, then press
OK to
continue.
7 Select [Automatic] > (Apply settings?)
[Yes] and conrm.
The WAC7500 displays a conrmation
screen
that the settings are saved.
Create wireless connection
with static IP address
This is how to navigate and select with the
remote control:
Press
or to select a menu option.
Press
to conrm a selection.
Press
to go back to the previous
screen.
Press
HOME to
go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
To select a number or an alphanumeric
character, press a button once or more
until you see the number or alphabetic
character in the display of the WAC7500.
To cycle through the alphanumeric
characters that are available, press a button
repeatedly.
•
•
»
•
•
•
•
•
•
4 Connect to a
home network
Before you connect the WAC7500 to a router:
Ensure that the PC meets the minimum
requirements.
Y
ou can choose one of these modes of
connection:
Wireless
connection with automatic IP
address
(see ‘Create wireless connection
with automatic IP address’ on page 11)
Wireless
connection with static IP address
(see
‘Create wireless connection with static
IP address’ on page 11)
Wired
connection with automatic IP
address
(see ‘Create wired connection
with automatic IP address’ on page 12)
Wired
connection with static IP address
(see
‘Create wired connection with static
IP address’ on page 12)
Create wireless connection
with automatic IP address
This is how to navigate and select with the
remote control:
Press
or to select a menu option.
Press
to conrm a selection.
Press
to go back to the previous
screen.
Press
HOME to
go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
To select a number or an alphanumeric
character, press a button once or more
until you see the number or alphabetic
character in the display of the WAC7500.
To cycle through the alphanumeric
characters that are available, press a button
repeatedly.
T
o delete the last character entry from the
display, press CLEAR .
•
•
•
•
•
•
•
•
•
•
•
•
EN
wac7500_um_01eng.indd 11 14-08-08 16:29:42
Loading ...
Loading ...
Loading ...