Loading ...
Loading ...
Loading ...
Installation instructions en
13
4.
Screw in the safety screw with the washer.
You can also use the right or left hole opening.
Fitting the flue duct
1.
To separate the flue duct sections, remove the ad-
hesive tape.
2.
Remove the protective foil from both flue duct sec-
tions.
3.
Note
¡ To prevent scratches, lay paper over the edges
of the outer flue duct section to protect the sur-
face.
¡ The slots on the inner flue duct section should
point downwards.
Push one flue duct section into the other.
4.
Insert the lower flue duct section into the brackets
on the left and right on the appliance.
5.
Screw the upper flue duct to the sides of the fixing
bracket using 2 short screws.
6.
Fit the grease filters.
To avoid causing damage, do not bend the grease
filters.
Fitting the filter cover
WARNING‒Risk of injury!
¡ Components inside the appliance may have sharp
edges.
▶
Wear protective gloves.
¡ Risk of injury from glass splinters.
▶
Protect the filter cover against impact.
▶
Do not drop the filter cover.
▶
Wear protective goggles during installation.
1.
Align the filter cover at an angle of 90° to the appli-
ance.
2.
Insert the brackets for the filter cover into the open-
ings on the appliance and lock into place.
3.
Remove the edge protection.
Loading ...
Loading ...
Loading ...