Loading ...
Loading ...
Loading ...
GEAppliances.ca
25
Chef Connect
Use the Chef Connect feature for connecting your
microwave to a GE range to sync your vent fan,
cooktop surface lights and clock via
Bluetooth technology.
1
You must have a Chef Connect enabled
range. To pair your microwave for the first
time, initiate the Chef Connect process on
the GE range. Refer to the range owner’s
manual for instructions
2
. On the microwave, hold Chef Connect
button for 3 seconds. The Bluetooth icon
on the display will start flashing as the
microwave starts to search and pair with
your GE Range. The icon
will remain ON
after pairing successfully.
If a GE Range is not found within 2 minutes
during search mode the microwave will stop
searching and the Bluetooth icon
will turn
OFF.
On initial setup, the setup protocol will start.
If the Chef Connect feature is enabled the
default settings are as follows:
- Display clock sync: ON
- Auto cooktop light: ON (HIGH setting)
- Auto vent fan: OFF
- Auto off: 15 minutes
3
Select 1 to sync the surface lights to your GE
range. It allows the microwave surface lights
to turn on at HIGH level automatically when
the paired range’s cooktop burner turns on.
4
Select 1 to sync the vent fan to your GE
range. This allows the microwave vent fan
to turn on at LOW speed automatically when
the paired range’s cooktop burner turns on.
Pairing is now complete, the Chef Connect
feature is now on.
Note: If there is no sync option selected
during set up, 5 minutes after icon
turns
on, the units will return to stand-by mode.
After completing the setting per above steps,
your microwaves vent fan and cooktop light
will be set to turn on automatically when the
cooktop burner is turned on. The cooktop
and range clock display will be syncd to
display the same time. The vent fan and
cooktop light will be set to automatically turn
off 15 minutes after the cooktop burner is
turned off.
If desired, the light, fan, and auto off settings
can now be changed using settings options
4, 5, and 6, respectively.
Press Chef Connect once to turn off and
twice to re-connect. The icon will
illuminate when on.
In the case of an unintended disconnect
such as lost power to the microwave or
range the connection will remain after power
resumed. For very short power interruptions,
the power may need to be reset in order to
reconnect
Chef Connect
On/Off
To Pair Hold 3 Sec
Loading ...
Loading ...
Loading ...