Loading ...
Loading ...
Loading ...
Tire Puncture u Removing Wheels
88
Troubleshooting
7.
Remove the rear axle nut.
8.
Remove the drive chain from the driven
sprocket by pushing the rear wheel
forward.
9.
Remove the rear axle shaft, side collars
and rear wheel from swingarm.
Installation
1.
To install the rear wheel, reverse the
removal procedure.
2.
Tighten the rear axle nut.
3.
Tighten the stopper arm nut.
4.
Adjust the rear brake pedal freeplay.
2 P. 62
5.
Adjust the drive chain. 2 P. 70
6.
After installing the wheel, apply the brake
several times and then check if the wheel
rotates freely. Recheck the wheel if the
brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Rear axle
shaft
Adjusting bolt
Drive chain
Torque: 69 lbf·ft (93 N·m, 9.5 kgf·m).
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m).
Loading ...
Loading ...
Loading ...