Loading ...
Loading ...
Loading ...
Engine Oil u Changing Engine Oil & Filter
57
Maintenance
6.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
7.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8.
Install a new oil filter and tighten.
9.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
10.
Fill the crankcase with the recommended
oil (2 P. 42) and install the oil fill cap/
dipstick.
11.
Check the oil level. 2 P. 54
12.
Check that there are no oil leaks.
Rubber
seal
Filter
Torque: 20 lbf·ft (27 N·m, 2.8 kgf·m).
Torque: 21 lbf·ft (29 N·m, 3.0 kgf·m).
Required oil
When changing oil & engine oil
filter:
2.6 US qt (2.5 liters)
When changing oil only:
2.4 US qt (2.3 liters)
Loading ...
Loading ...
Loading ...