Loading ...
Loading ...
Loading ...
11
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Front Panel≫ Rear Panel≫ Remote≫
1. On/Standby button
2. Hybrid Standby indicator: Lights up when any of the following functions is
working or enabled in standby state of this unit. When this indicator is lighting,
the power consumption in standby state increases, however, the increase in
power consumption is minimized by entering the Hybrid Standby mode where
only the essential circuits operate.
– HDMI CEC ( p163)
– HDMI Standby Through ( p163)
– USB Power Out at Standby ( p168)
– Network Standby ( p168)
– Bluetooth Wakeup ( p168)
3. HDMI Out button: Allows you to select the HDMI OUT jack to output video
signals from "MAIN", "SUB", and "MAIN+SUB". ( p148)
4. Remote control sensor: Receives signals from the remote controller.
• The reception range of the remote controller is within a distance of approx.
16´/5 m, and an angle of 20° in vertical direction and 30° to right and left.
5. Adjusts the sound quality. Press the Tone button to select an item to adjust
from "Bass", "Vocal" and "Treble", and press + and - to adjust. ( p115)
6. Listening Mode button: Press "Movie/TV", "Music" or "Game" button to change
the listening mode. ( p117)
7. Display ( p12)
8. Dimmer button: Switches the brightness of the display with three levels. It
cannot be turned off completely.
9. Memory button: Used to register AM/FM radio stations. ( p105)
10.
Tuning Mode button: Switches the tuning mode. ( p103)
11.
Info button: Switches the information on the display. ( p118)
12.
Setup button: You can display advanced setting items on the TV and the
display to have a more enjoyable experience with this unit. ( p144)
13.
Cursor buttons ( / / / ) and Enter button: Select an item with the
cursors, and press Enter to conrm your selection. When using Tuner, use
them to tune in to stations. ( p103)
14.
Return button: Returns the display to the previous state while setting.
15.
Master Volume
16.
Zone 2 button: Controls the multi-zone function. ( p109)
Off button: Switches the multi-zone function off
17.
Zone 3 button: Controls the multi-zone function. ( p109)
Off button: Switches the multi-zone function off
18.
Whole House Mode button: Enables the WHOLE HOUSE MODE function to
play the same source in all the multi-zone connected rooms. ( p110, 112)
Off button: Switches the WHOLE HOUSE MODE function off.
19.
Phones jack: Connect headphones with a standard plug (ø1/4"/6.3 mm).
20.
Setup Mic jack: Connect the supplied speaker setup microphone. ( p186)
21.
Input selector buttons: Switches the input to be played.
22.
AUX Input HDMI jack: Connect a video camera, etc. using an HDMI cable.
( p70)
Loading ...
Loading ...
Loading ...