Loading ...
Loading ...
Loading ...
Steam en
19
`Steam
St e a m
With some heating modes, you can prepare food with
steam assistance. In addition, the Dough proving and
Reheat heating modes are available.
:Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Noise
Pump
You will hear a humming noise while the pump is in
operation and after switching it off. This noise is caused
by the pump function test. It is a normal operating
noise.
Control panel
You will hear a humming or clicking noise when
opening the control panel. These noises are caused by
the control panel being pushed out. They are normal
operating noises.
Steam baking – Steam-assisted cooking
When you cook with steam assistance, steam is
introduced into the cooking compartment at various
intervals and with varying degrees of intensity. This
gives you a better cooking result.
Your food
■ Becomes crispy on the outside
■ Develops a shiny surface
■ Is succulent and tender on the inside
■ Only undergoes a minimum reduction in volume
You set the type of heating and steam intensity
combination that you want. Use the information in the
tables to select a suitable type of heating and steam
intensity, or select a programme.
Steam intensity
Different intensity levels are available when adding
steam:
Suitable types of heating
You can switch on steam assistance for these types of
heating:
■ 4D hot air <
■ Top/bottom heating %
■ Hot air grilling 7
■ Keeping warm O
Setting
Before applying the settings, fill up the water reservoir.
1. Select a suitable type of heating and temperature.
2. Touch the S field.
The steam level will be highlighted in white next to
the temperature on the display.
3. Turn the rotary selector to set the steam level.
4. Press the l Start/Stop button to start.
The appliance begins to heat up.
Note: If the water tank runs dry during an operation with
steam assistance, a message appears on the display
prompting you to fill up the water tank. The operation
continues without adding steam.
Changing and cancelling
To change the steam level, touch the S symbol. The
steam level will be highlighted in white, and can be
changed using the control ring. The change will be
applied immediately.
If you want to cancel steam assistance, touch the
S symbol again. The appliance will continue to
operate, but steam will not be injected into the cooking
compartment.
Reheating
With the "Reheating U" type of heating, you can gently
reheat food that has already been cooked or crisp up
day-old baked goods. Steam is switched on
automatically.
Note: If the water tank runs dry during the operation
with the Reheating setting, the operation is interrupted.
Fill the water tank.
Setting
A cooking time must always be set for the steam
heating types.
Before applying the settings, fill up the water reservoir.
1. Set the type of heating.
2. Touch the } field.
The temperature is highlighted in white in the
display.
3. Turn the rotary selector to set the temperature.
4. Touch the s field.
The cooking time is highlighted in white in the
display.
5. Turn the rotary selector to set the cooking time.
6. Press the l Start/Stop button to start.
The cooking time counts down in the display.
The appliance begins to heat up.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating up. The cooking
time 00 m 00 s is shown on the display.
When your dish is ready, use the ÿ On/Off button to
switch off the appliance.
Intensity Setting
Low 01
Medium 02
High 03
Loading ...
Loading ...
Loading ...