PACKAGE CONTENTS
• Refrigerator water lter
• Quick Setup Guide
FEATURES
• Works with Insignia French Door Refrigerators (NS-RFD26SS9,
NS-RFD26CXSS0, NS-RFD21CXSS0, and NS-RFD21CISS0)
• NSF 53 certied to remove contaminants, including chlorine,
asbestos, cysts, lead, mercury, o-dichlorobenzene, carbofuran,
benzene, atrazine, and toxaphene
• Keeps benecial minerals that are good for your health
• Improves taste and removes odor for more palatable food and
drinks
• Lasts up to six months or 300 gallons (1,136 L)
• Eliminates cloudiness for fresh, clear drinking water
GENERAL INSTALLATION GUIDELINES
• It is normal for black carbon particles to appear on the outside of your
lter. This happens when the lter is moved during shipping. It is safe,
simply wipe it o.
• The lter connectors are large to prevent leaks. You might have
to twist the lter hard to make sure the connection is secure.
INSTALLING YOUR WATER FILTER
To drink the freshest and cleanest water from your refrigerator, change
the lter every six months or when the icon starts blinking.
1 Shut o the water supply, then turn o the water shuto valve on
your refrigerator.
2 Turn the old water lter about 1/4 turn counter-clockwise, then pull
the lter out of the lter holder. Depending on water impurities, you
may have to pull hard to remove the lter.
Note: When you pull out the water lter, a little water may leak from the
opening. This is normal. To minimize the water leakage, keep the lter
horizontal when you pull it out.
3 Pull out the water lter tray, then empty the tray. Dry around the lter
opening with a dry cloth, then put the tray back in.
4 Insert the new water lter into the water lter holder.
5 While turning the new lter clockwise, push it all the way into the
holder until it locks into place.
6 Turn on the shuto valve and the water supply, then run water
through the dispenser until the water runs clear (about ve minutes).
This cleans the water supply system and removes any trapped air.
7 Open the refrigerator door and make sure that no water leaks from
the water lter.
Note: If leaks occur, repeat the installation steps. If leaks persist, discontinue
use and call customer service.
8 After you install the new lter, press and hold both the On/O and
Super Freeze buttons for about three seconds to turn o the icon.
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Refrigerator
Water Filter
NS-WF26FD9-1
Flat size (W×H): 12.36 × 5.83 in. (313.94 × 148 mm)
Final folded size: 4.12 × 5.83 in. (104.6 × 148 mm)
SOLUTION
• Make sure that you soak your lter in water for 15 minutes before installing.
• Make sure that the lter is securely connected to the lter holder. Do not use
tools to tighten the lter in place.
• Make sure that the water line to the refrigerator is turned on. The valve must
be completely open for the refrigerator to receive water.
• Make sure that the refrigerator door is closed or the dispenser will not work.
• A few drops are normal. If the water is dripping constantly, have a service
technician check your refrigerator’s water valve.
• Cloudy water is caused by microscopic air bubbles. Run two to three gallons
of water from your dispenser to clear the air bubbles out.
• Black carbon particles in the water are normal and appear with all carbon
lters. Run two to three gallons of water through your dispenser to remove
loose carbon particles.
• Make sure that you soak your lter in water for 15 minutes before installing.
• Noises and sputtering are caused by trapped air pockets. Run two to three
gallons of water from your dispenser to push the air out.
• If you do not use your water dispenser for more than four days, run two
gallons of water through the dispenser before using it.
• Make sure that you replace your lter every six months to prevent bacteria
growth.
PROBLEM
My refrigerator is not
dispensing water
My water dispenser is
dripping
My water is cloudy or
contains black carbon
particles
My new lter is
making noises or
sputtering
My water tastes bad
TROUBLESHOOTING
STORAGE AND MAINTENANCE
• Replace your lter every six months to prevent bacteria and fungus
growth in your lter, supply lines, and storage tank.
• Stored lters do not expire. Keep your unused lters in a cool, dark,
and dry place until you need them.
• If you do not use your water dispenser for more than four days, run
two gallons of water before using it to prevent bad tasting water.
NS-WF26FD9-1_19-0606_QSG_V3_EN.ai 1 10/21/2019 10:22:43 AMNS-WF26FD9-1_19-0606_QSG_V3_EN.ai 1 10/21/2019 10:22:43 AM
Loading ...
