User Manual - Page 38

For BGB6X330. Also, The document are for others Bosch models: BGB6, BGL6

Loading ...
Loading ...
Loading ...
en Cleaning and servicing
38
Cleaning the appliance
Requirement:The appliance is
switched off.
→"Switching off the appliance",
Page35
1. Clean the appliance and the ac-
cessory with a soft cloth and a
commercially available plastic
cleaner.
2. Clean the infrared receiver located
on the On/Off switch.
Cleaning the Remote-Power-
Control handle
Tip:Clean the infrared transmitter on
the Remote-Power-Control handle
regularly. A dirty Remote-Power-Con-
trol handle can lead to faults during
operation.
Clean the Remote-Power-Control
handle with a soft cloth and a com-
mercially available plastic cleaner.
Opening the lid
Requirement:The appliance is
switched off.
→"Switching off the appliance",
Page35
1. Open the lid.
→Fig.
22
2. Fold up the lid completely.
Closing the lid
Tip:Check that the dust bag is not
trapped between the lid and the ap-
pliance.
Requirements
¡ The dust bag has been inserted.
¡ The motor protection filter has
been inserted.
¡ The exhaust filter has been inser-
ted.
Close the lid and lock it in place.
Cleaning the dust compartment
Requirement:The dust bag has
been removed.
→"Changing the dust bag",
Page38
If required, vacuum the dust com-
partment using a second appli-
ance or clean it with a dry duster
or dusting brush.
a The dust compartment has been
cleaned.
Changing the dust bag
If the inspection window of the filter
change indicator lights up continu-
ously when the nozzle is raised and
at the highest power level, change
the dust bag.
Requirement:The lid is open.
→"Opening the lid", Page38
1. To close the dust bag, pull the
locking tab.
→Fig.
23
2. Remove the full dust bag from the
holder.
3. Dispose of the full dust bag.
4. Push the new dust bag into the
holder until it clicks into place.
Do not kink the dust bag.
→Fig.
24
5.
→"Closing the lid", Page38
Cleaning the motor protection
filter
Tip:To achieve the best possible va-
cuuming results, tap out or wash the
motor protection filter regularly. After
vacuuming fine dust particles, clean
or replace the motor protection filter
in order to guarantee the appliance's
suction.
Loading ...
Loading ...
Loading ...