Loading ...
Loading ...
Loading ...
Basic operation en
35
2. Insert the hose adapter into the air-
intake opening in the lid and lock it
in place.
→Fig.
4
3. Connect the handle to the tele-
scopic tube.
→Fig.
5
4. Connect the telescopic tube to the
floor nozzle.
→Fig.
5
5. Place the accessory support
1
onto
the telescopic tube.
→Fig.
6
6. Place the crevice nozzle
1
from the
bottom onto the accessory support
1
.
→Fig.
6
7. Place the brush ring
1
onto the up-
holstery nozzle
1
.
→Fig.
7
8. Place the upholstery nozzle
1
with
the brush ring
1
from above onto
the accessory holder
1
.
→Fig.
6
Inserting the batteries
▶
Insert the batteries into the Re-
mote-Power-Control handle.
→"Changing the batteries",
Page39
Basic operation
Basic operation
You can find out everything you need
to know about operating your appli-
ance here.
Setting the telescopic tube
1. Unlock the telescopic tube.
2. Set the required length of the tele-
scopic tube.
→Fig.
8
Switching on the appliance
1. Hold the mains plug and pull it out
to the required length.
2. Insert the mains plug into the
socket.
3. Press .
→Fig.
9
a The status display pulses white.
a The appliance is in standby mode.
Note:Risk of damage to the appli-
ance caused by being in standby
mode for too long. If you want to stop
vacuuming for a longer period of
time, switch off the appliance.
Switching off the appliance
1. Press .
a The status display goes out and
quickly flashes white three times
after a short time.
a The appliance switches off. Any
functions currently in progress are
cancelled.
2. Unplug the mains plug.
3. Briefly pull on the mains power
supply cord and then let go.
a The power cord retracts automatic-
ally.
Starting vacuuming
Requirement:The appliance is in
standby mode.
→"Switching on the appliance",
Page35
▶
Press .
→Fig.
10
a The status display lights up white.
a The appliance starts at the highest
power level.
a The appliance starts in the most
recently selected power level if va-
cuuming was stopped previously.
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...