Loading ...
Loading ...
Loading ...
Cleaning and servicing en
37
2. Press the two locking catches on
the bristle ring.
3. Push the bristle ring down and
lock it in place.
→Fig.
17
a The Multi-Use-Brush is ready to
use.
4. Vacuum using the Multi-Use-Brush.
→"Starting vacuuming", Page35
→"Stopping vacuuming", Page36
5. Press the two locking catches on
the bristle ring.
6. Push the bristle ring upwards and
lock it in place.
→Fig.
17
7. Push the floor tool or the tube onto
the Multi-Use-Brush.
8. Press the release button and re-
move the Multi-Use-Brush to re-
move.
→Fig.
18
Starting emergency mode
If the Remote-Power-Control handle
does not work, you can vacuum in
emergency mode.
Requirement:The appliance is in
standby mode.
→"Switching on the appliance",
Page35
1. Press .
a The status display goes out and
quickly flashes white three times
after a short time.
2. Press while the status display is
flashing.
a The appliance starts in turbo
mode.
Stopping emergency mode
Note:After vacuuming, check the Re-
mote-Power-Control handle.
→"Troubleshooting", Page41
▶
Press .
a The status display goes out and
quickly flashes white three times
after a short time.
Removing the appliance
1. Disconnect the connection
between the floor nozzle and the
telescopic tube.
→Fig.
19
2. Disconnect the connection
between the telescopic tube and
the handle.
→Fig.
20
3. Press the two locking catches to-
gether and pull the hose out of the
appliance.
→Fig.
21
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning products
Only use suitable cleaning products.
ATTENTION!
Using unsuitable cleaning products
or incorrect cleaning may damage
the appliance.
▶
Do not use harsh or abrasive de-
tergents.
▶
Do not use cleaning products with
a high alcohol content.
▶
Do not use hard scouring pads or
cleaning sponges.
▶
Wash sponge cloths thoroughly
before use.
Loading ...
Loading ...
Loading ...