Loading ...
Loading ...
Loading ...
code: VIM 201301/S/01
12
TEMPERATURE SETTINGS
Important: The LCD displays by default the actual internal air temperature.
The temperature settings are pre-set at the factory as follows. In the event of a power
interruption, all previous temperature settings are automatically erased and it will revert to
the preset temperature settings.
Factory preset chart
Model Setting Temperature
V30SGMe
12
12ºC (+/- 2.5ºC)
V26/V30/ V40 /AL /S3/BK
SG e
12
12ºC (+/- 2.5ºC)
V30/ V40 /AL /S3/BK
SG 2e
Upper compartment: 6
6ºC (+/- 2.5ºC)
Lower compartment: 12
12ºC (+/- 2.5ºC)
V40 /AL /S3/BK
DG 2e
Right compartment: 12 12ºC (+/- 2.5ºC)
Left compartment: 7 7ºC (+/- 2.5ºC)
It is important to understand that there is a difference between the air temperature inside
the wine cellar and the actual temperature of the wine: You will need to wait
approximately 12 hours before noticing the effects of temperature adjustment due to the
critical mass within a full wine cellar.
Once the temperature is set, it is strongly advised not to toy with it or adjust frequently.
The thermostat will maintain the temperature inside the wine cellar within a +/- 2.5ºC
range. But the thermal inertia of the wine and the glass is such that within this temperature
range, the actual temperature of the wine will only fluctuate 0.5ºC to 1ºC.
Electronic models:
V30SGMe /AL/S3/BK model
Control panel of V30SG me
A
Loading ...
Loading ...
Loading ...