Loading ...
Loading ...
Loading ...
Reference
41
VQT3X48
You have forgotten your ratings password.
You want to cancel the ratings level.
¾ The ratings level returns to the factory preset.
This unit does not recognize the USB
connection correctly.
¾ Disconnect and reconnect the USB cable. If it
still does not recognize the connection, turn
this unit off and on again.
¾ USB devices may not be recognized by this
unit when connected using the following:
– a USB hub
¾ If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
The images from this unit do not appear on
the television.
Picture is distorted.
¾ An incorrect resolution is selected in “HDMI
Video Format”. Reset the setting as follows:
Set the item again. (> 32)
¾ When “3D BD-Video Playback” in the Setup
menu is set to “Automatic”, images may not
be output depending on the connection
method. After removing the disc from this unit,
select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 34)
1 Turn the unit on.
2 Press and hold [KEYS], the yellow button and
the blue button at the same time for more
than 5 seconds.
– Status LED and INFO LED start to flash.
3 Press the red button repeatedly until the
CALL LED lights up.
4 Press the green button.
– a USB extension cable
The switches of the unit do not work.
¾ Touch the switches with your finger. They
may not work if operated with your fingernails
or hands wearing gloves.
(> 9, “Indicator LEDs”)
Picture
1 Turn the unit on.
2 Press and hold [KEYS], the yellow button and
the blue button at the same time for more
than 5 seconds.
– Status LED and INFO LED start to flash.
3 Press the red button repeatedly until the
CALL LED flashes.
4 Press and hold the green button for more
than 3 seconds.
– When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD audio are not output in
bitstream, select “Yes” in “Default Settings”
and make proper settings. (> 37)
¾ The unit and television are using different
video systems.
1 Turn the unit on.
2 Press and hold [KEYS], the yellow button and
the blue button at the same time for more
than 5 seconds.
– Status LED and INFO LED start to flash.
3 Press the red button repeatedly until the
CALL LED flashes and ACCESS LED lights
up.
4 Press and hold the green button for more
than 3 seconds.
The system switches from PAL to
NTSC
or
vice versa.
¾ The system used on the disc doesn’t match
your television.
– PAL discs cannot be correctly viewed on an
NTSC television.
(> 9, “Indicator LEDs”)
(> 9, “Indicator LEDs”)
DMP-BBT01GN-VQT3X48_mst.book 41 ページ ２０１２年４月２０日 金曜日 午後２時４４分
Loading ...
Loading ...
Loading ...