Loading ...
Loading ...
Loading ...
25
Advice and recommendations on use
12) Do not unscrew the jar (3) from the blade unit (5) until you wish to remove the blade unit (5) for cleaning.
If you loosen the jar (3) from the blade unit (5), the jar is no longer tight. Do not loosen the blade unit (5)
from the jar (3) while there is any liquid in the blender as this will cause the liquid to leak out of the bottom
of the jar (3).
13) The speed can be increased or decreased by the speed selector (12) even during the blending phase to
suit requirements.
14) When blending hot food or liquids wear oven gloves. Remove the measuring filler cup (1) and place
the lid (2) on the mouth of the jar. Never put your bare hand on the lid when the blender is running with
hot food or liquid inside the jar (3). In such cases, always work at minimum speed = 1.
15) Stop the blender after a few seconds to check the consistency of the food that you are blending.
16) The Vela Blender has an auto power-off function in order to avoid serious damages on the mechanical
parts of the complete blade unit (5). After 3 minutes of continuous working the blender will stop automatically.
To reset the function move the speed selector (12) to the zero (0) position and wait for 1 minute. In this
way the blender starts to work again.
B. Using pulse function (pulse button (14) )
1) Before using the blender, make sure that all parts of the jar and of the lid are perfectly assembled and
fixed in place.
2) This function can be used at all speeds at which the blender is running. Press this button (14) to achieve
maximum speed.
3) Rotate the speed selector (12) in the position "P". Only in this way t
he pulse function is activated. Then
press the pulse button (14) to make the blades rotate at the maximum speed until the pulse button (14) is
released.
4) When blending normally (setting speed on the speed selector (12) ) you can press the pulse button (14)
to obtain the maximum speed and keep this speed until you release the pulse button
(14). Once the pulse
button (14) is released, the blender will return to the speed set by the speed selector (12).
5) When blending hot food or liquids, wear oven gloves. Place the lid (2) over the mouth of the jar after
removing the measuring filler cup (1). Never place your bare hand on the lid when the blender is running
with hot food or liquid inside the jar (3).
6) Use a spatula only when the blender is switched off and the plug (7)
is unplugged from the socke
t.
7) Stop the blender after a few seconds to check the consistency of the food that is being blended.
C. Using the Ice Function (ICE)
1) Adhere strictly to all safety, installation and commissioning instructions specified above.
2) Before using the blender, make sure that all parts of the jar and of the lid are perfectly assembled and
fixed in place
3) This function/program allows to optimize the ice crush performance.
Loading ...
Loading ...
Loading ...