Loading ...
Loading ...
Loading ...
22
Installation and starting up
The original package is designed for dispatch by post. Keep it in case you need to return the blender to the
supplier. Before installing the blender strictly follow all points of the safety instructions specified above.
After removing the blender from its package, check that it is in perfect condition and check that no type
of material, packaging, warranty sheet or anything else has accidentally entered inside the housing of the
motor base (6) and the jar (3) during transit or unpacking.
Keep the plastic bag containing the blender away from children: it may cause suffocation.
Do not plug in the blender until it has been correctly and completely assembled and always unplug the
blender after use.
Before using for the first time, wash the measuring filler cup (1), lid (2), jar (3), seal (4) and the assembled
blade unit (5). Wash with neutral, non-abrasive and non-corrosive detergents, rinse and dry carefully.
To remove the dust that may have accumulated on the motor base body (6) of the blender, simply wipe with
a dry soft cloth.
How to remove the blade unit (5) from the Jar (3).
1) place one hand on the Jar base (3) (image 1), with the thumb press the lever in the point (PUSH)
(image 2-3) and turn on the complete blade unit (5) to the opened padlock direction (image 4). Take out
the blade complete unit from the Jar base ( image 5 ).
1
3
2
5
4
Loading ...
Loading ...
Loading ...