Loading ...
Loading ...
Loading ...
Installation
55
EN
3. Pull the knobs upwards to remove them.
4. Remove the screws fastening the hob
and the plates corresponding to each
burner zone.
5. Remove the plates of the igniters and
thermocouples.
6. Remove the fastening plates (1) and the
hob top (2).
Replacing nozzles
1. Unscrew screw A and push air regulator
B as far as it will go.
2. Use a spanner to remove the nozzles C
and install the new ones for the required
gas supply, following the indications
given in the relevant table (see “Burner
and nozzle specifications tables”).
The nozzle tightening torque must
be no more than 3 Nm.
Loading ...
Loading ...
Loading ...