Loading ...
Loading ...
Loading ...
Problem solving guide
38
Problem Possible cause and remedy
After the SmartLine
appliance has been
switched on, appears
briefly in the timer
display. The SmartLine
appliance does not heat
up.
The SmartLine appliance is in demonstration mode.
Touch the0 and 2 sensor controls at the same
time until flashes alternately with in the
timer display.
The Teppanyaki or a
Teppanyaki zone
switches off
automatically.
It has been operated for too long.
Switch the Teppanyaki or the zone back on (see
“Safety features – Safety switch-off”).
The overheating protection mechanism has been
triggered.
See “Safety features - Overheating protection”.
An operating noise can
be heard after the
SmartLine appliance
has been switched off.
The cooling fan runs until the SmartLine appliance
has cooled down and then switches off
automatically.
The sensor controls
show increased
sensitivity or fail to
react.
The sensitivity level of the sensor controls has
changed.
Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the
SmartLine appliance. Also ensure the area
surrounding the SmartLine appliance is not too
dark.
Take any pans off the SmartLine appliance and
wipe away any food deposits.
Ensure that there is nothing covering the entire
SmartLine appliance or sensor controls.
Interrupt the power supply to the SmartLine
appliance for approx. 1minute.
If the problem persists after power is restored,
please contact Miele.
flashes alternately
with in the timer
display and a tone is
sounding.
The SmartLine appliance is connected incorrectly.
Disconnect the SmartLine appliance from the
mains.
Contact Miele.
Loading ...
Loading ...
Loading ...