Loading ...
Loading ...
Loading ...
Additional functions
26
Stop & Go
The set power level is reduced to 1
when the Stop&Go function is
activated.
The power levels and the timer settings
cannot be changed, the SmartLine
appliance can only be switched off. The
minute minder and automatic switch-off
times continue to run.
If the function is deactivated, the
appliance switches back to the power
level that was set last.
If the function is not deactivated within
1hour, the SmartLine appliance will
switch off.
Activating / Deactivating
Touch the sensor.
Recall
If the SmartLine appliance is
accidentally switched off during use,
you can use this function to restore all
the settings. The SmartLine appliance
must be switched on again within
10seconds.
Switch the SmartLine appliance on
again.
The previously set power levels flash.
Press one of the flashing power level
indicators immediately.
The appliance will continue to operate
using the settings selected previously.
Loading ...
Loading ...
Loading ...