Loading ...
Loading ...
Loading ...
8. Slide pivot pin assembly out and remove right handle assembly.
9. Rotate right handle assembly 180 degrees.
10. Apply Loctite to threads inside the pivot pin and screw.
11. Place right handle assembly in position and slide pivot pin assembly back in place.
12. Install the screw and washer to the right handle assembly using two 7/32” Allen wrenches.
Install Left Linkage Rod
1. Pivot left handle assembly up and slide left linkage rod onto left arm.
QtyDescriptionItem
1
Screw, Socket Head, .250-20
UNC-3A SS
1
1Loctite #2422
1
Washer, Flat, .281 ID x .500 OD x
.062”
3
1Linkage Rod Cap 2.00 OD4
1Flange Spacer5
1Left Arm6
1Left Linkage Rod7
2. Place a drop of Loctite onto the screw.
3. Install the screw, washer, linkage rod cap, and flange spacer using a 3/16” Allen wrench.
4. Tighten screw to a minimum of 90 in-lbs.
Install Right Linkage Rod
1. Pivot right handle assembly up and slide right linkage rod onto right arm.
QtyDescriptionItem
1
Screw, Socket Head, .250-20
UNC-3A SS
1
1Loctite #2422
1
Washer, Flat .281 ID x .500 OD x
.062”
3
1Linkage Rod Cap 2.00 OD4
1Flange Spacer5
1Right Arm6
1Right Linkage Rod7
2. Place a drop of Loctite onto the screw.
3. Install the screw, washer, linkage rod cap, and flange spacer using a 3/16” Allen wrench.
Page 38 of 47
Loading ...
Loading ...
Loading ...