Loading ...
Loading ...
Loading ...
• 7 mm Allen wrench
• 7/32” Allen wrench
• 17 mm Open end wrench
• 1/2” Open end wrench
• 9/16” Open end wrench
Lift and Move Unit
1. Remove lag bolts and shipping supports. Keep package material on linkage arms at this time. This will protect
the paint from scratching during assembly.
2. Grasp each rear support leg firmly and lift with one person on each side.
3. Lift the lower rear support legs so the front transport wheels are able to roll on floor.
Use proper lifting methods.
4. Move unit to intended location.
5. Lower rear support legs.
Install Console Weldment
1. Place console weldment into position on frame.
QtyDescriptionItem
1Weldment, Console1
1Frame2
1Bracket, Lower3
4
Screw, Socket Head, .375-16 x
2.5"
4
4Locknut, 375-16 Nylon5
2. Insert (from underneath) four bolts and lower bracket into frame and console weldment.
3. Thread four locknuts onto bolts by hand.
4. Tighten four bolts and locknuts with a 7/32” Allen wrench and a 9/16” open-end wrench.
Page 18 of 47
Loading ...
Loading ...
Loading ...