INSTALLING THE WATER FILTER
Carefully remove the plastic cap from the new lter before installation
1 YOU MUST SOAK your new lter in water for 15 minutes prior to
installing it in your refrigerator to remove air from the carbon block.
2 Twist the old lter a quarter-turn counter-clockwise.
3 Pull the lter straight out and discard.
4 Push the new lter into the refrigerator until it stops.
5 Twist the lter a quarter-turn clockwise.
6 Please make sure the indicator arrows on the new lter are lined up with
the indicator arrow on the refrigerator after installation.
7 Run about two to three gallons of water through your refrigerator’s water
dispenser to remove air and loose carbon pieces. The water may be
cloudy and sputter until the air is removed.
8 Reset your “change lter” indicator (if your refrigerator has one). See
below.
RESETTING YOUR CHANGE FILTER INDICATOR
Note: These are the most common lter reset instructions. If the instructions don’t
work for your refrigerator brand, see the documentation that came with your
refrigerator.
Quick Setup Guide
|
NS-HAF-CIN-1/NS-HAF-CIN-2/NS-HAF-CIN-2-C
Refrigerator Filter
Before using your new product, please read these instructions to prevent any damage.
Congratulations on your purchase of one of the highest performing
water lters on the market today. Insignia lters use a high-grade
coconut carbon that has 50% more micro-pores than standard carbon.
They also use fewer high-compression binders, giving you the best
water ltration possible.
PACKAGE CONTENTS
• Refrigerator lter(s) (1 or 2 pack)
• Quick Setup Guide
GENERAL INSTALLATION GUIDELINES
• It is normal for black carbon nes (particles) to appear on the outside
of your lter. This happens when the lter is jarred in shipping. It is
safe, simply wipe it o.
• The lter connectors are larger to prevent leaks. You might have to
twist the lter hard to make sure the connection is secure.
REFRIGERATOR BRAND
Samsung
INSTRUCTIONS
Press and hold the ICE TYPE and CHILD LOCK
buttons for three seconds. The water lter
indicator should turn green.
Note: Only hold these buttons for three seconds. Holding
these buttons for ve seconds cancels the reset. If you
cancel the reset, repeat the procedure.
*Actual product may
vary slightly from
what is pictured
Loading ...