Loading ...
Loading ...
Loading ...
BAFFLE FILTERS, GREASE TROUGHS AND LIGHTS
BAFFLE FILTERS
Your baffle filters come with knobs to aid in filter
placement and removal. Grab the knobs with your
thumb and index finger. Simultaneously, slide and
force the first baffle filter in an upward (slightly
pitched) direction towards the ceiling. Spring clips
have been attached within the framework to prevent
the baffle filters from rattling when fan is operating.
These spring clips will make it difficult to insert and
remove baffle filters. As the baffle filter is forced
upward towards the ceiling, simultaneously swing the
lower portion of the filter down and out of the
framework. Remove the remaining baffle filters in
the same fashion. The first baffle filter removed may
be difficult, but the remaining filters will follow with
ease.
Baffle filters may be washed in your dishwasher.
Simply place on the lower rack of dishwasher using a
normal cleaning cycle.
To re-install your new/clean filters within the hood
cavity, begin the process but in reverse. First, place
the clean “grease trough(s) (if applicable) in the
cavity framework followed by the first of the baffle
filters keeping in mind the first of the baffle filters
will be easy to re-install. The last baffle filter will be
difficult due to the tight fit and limited space.
GREASE TROUGHS
The “grease trough” (if applicable) rests within the
lowest portion of the rectangular open framework.
Check for grease build-up each month. The “grease
trough(s) may be wiped free of excess grease and
placed on top-shelf of your dishwasher for cleaning.
HALOGEN LIGHTS
Halogen lights are included with the purchase of your
hood. To purchase halogen bulbs through Prizer
Hoods, you can contact our Customer Service
Department or visit your local home improvement
store replacing with a PAR 20/PAR16, 50 watt, 120
volt, Halogen Flood.
CONTROLS
Always “turn-on” the hood fan prior to cooking in
order to establish an air flow in the kitchen. Allow
the fan to remain operating after cooking for a few
minutes to clear the air. This measure will ensure the
kitchen remains smoke-free & fresher smelling.
FAN
The hood’s fan is controlled by a three-speed switch.
Speeds Off, Low, Medium and High are printed next
to the fan control knob and correspond to the fan
speed.
HOOD LIGHTING
The halogen lights are controlled by a single variable
light switch or high/low switch.
CLEANING YOUR STAINLESS STEEL HOOD
Keep your hood free of grease build-up under the
hood’s surface as well as exterior surfaces. Do no
use abrasive cloths, steel wool, scrubbing pads or
scouring powders. Do not use paper towels or any
other coarse cloths for cleaning stainless steel. Micro
fiber cloths are recommended for cleaning.
We recommend using a stainless steel cleaning spray
to maintain the beautiful luster of your stainless steel
hood. Spray the cleaning/polishing solution directly
onto a cleaning cloth as opposed to spraying the
surface of the hood.
16
Loading ...
Loading ...