Loading ...
Loading ...
Loading ...
INSTALLING METAL LINERS
1. If the “EZ Optional Trim Kit” will be used, it must be installed prior to mounting the metal liner to the hood
shell. Use the provided #8 Phillips head screws. (See Figure 3)
2. Lift the metal liner into the hood shell. Due to the weight of the liner, 3 or 4 men may be required to hold the
liner in place to insure a tight installation.
3. Install #6 x ½” screws through the pre-drilled “EZ Optional Trim Kit” mount holes through to the hood shell.
Tap the cover caps into the “EZ Optional Trim Kit” mount holes for a flush appearance. (See Figure 4-A)
4. Additional mounting fasteners may be used to secure the liner to the back wall and the ceiling. Access for
drilling is through the interior on the liner.
21
Cap
Loading ...
Loading ...
Loading ...