Loading ...
Loading ...
Loading ...
en Troubleshooting
62
Fault Cause troubleshooting
The programme does not
start.
2. Press Start/Reload to start the pro-
gramme.
Childproof lock is activated.
▶
→"Deactivating the childproof
lock", Page47
Ready In is activated.
▶
Check whether Ready In is activ-
ated.
→"Buttons", Page26
Laundry is caught in the
door.
1. Open the door again.
2. Remove any trapped laundry.
3. Close the door.
4. Press Start/Reload to start the pro-
gramme.
The door cannot beopened. Rinse Hold is activated.
▶
Continue the programme by select-
ing Spin or Drain and pressing
Start/Reload.
→"Resuming the programme when
the programme status is Rinse
Hold", Page46
The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
→"Cancelling the programme",
Page46
Water level is too high.
▶
Start the Drainprogramme.
Programme with active oxy-
gen has been stopped; the
active oxygen is removed.
▶
Wait until there is no active oxygen
in the drum.
Power failure.
▶
Open the door using the emergency
release.
→"Emergency release", Page69
The water is not draining. Drain pipe or water outlet
hose is blocked.
▶
Clean the drain pipe and the water
outlet hose.
Drain pipe or water drain
hose is caught or jammed.
▶
Ensure that the drain pipe and wa-
ter drain hose are not kinked or
trapped.
Drain pump is blocked.
▶
→"Cleaning the drain pump",
Page55
Rinse Hold is activated.
▶
Continue the programme by select-
ing Spin or Drain and pressing
Start/Reload.
Loading ...
Loading ...
Loading ...