Loading ...
Loading ...
Loading ...
Troubleshooting en
61
Fault Cause troubleshooting
"E:30 / -80"
▶
Reduce the amount of detergent for
the next washing cycle with the
same load.
Unapproved extension in-
stalled on the water drain
hose.
▶
Remove any unapproved exten-
sions from the water hose. Connect-
ing the appliance
"E:36 / -25 / -26" Drain pump is blocked.
▶
→"Cleaning the drain pump",
Page55
"E:10 / -10" The filter in the water inflow
is blocked.
▶
"Clean the water inflow filter"
→Page58.
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is
kinked or jammed.
▶
Ensure that the water inlet hose is
not kinked or jammed.
"E:35 / -10" There is water in the base
trough.
▶
Turn off the water tap.
▶
Call the after-sales service.
→"Customer Service", Page71
The appliance is leaking.
▶
Turn off the water tap.
▶
Call the after-sales service.
→"Customer Service", Page71
All other error codes. Malfunction
▶
Call the after-sales service.
→"Customer Service", Page71
Water cooling To protect the wastewater
pipes, the hot detergent
solution is cooled before be-
ing drained.
▶
Wait until the detergent solution
has cooled down.
Malfunctions
Fault Cause troubleshooting
The appliance is not work-
ing.
The mains plug of the power
cord is not plugged in.
▶
Connect the appliance to the power
supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the
fuse box.
There has been a power cut.
▶
Check whether the lighting in your
kitchen or other appliances are
working.
The programme does not
start.
You have not pressedStart/
Reload.
▶
Press Start/Reload.
Door is not closed. 1. Close the door.
Loading ...
Loading ...
Loading ...