Loading ...
Loading ...
Loading ...
12 49-5903-3
Problem Possible Cause What To Do
Loud noises (other
than those during
grinding of bones
and fruit pits)
Silverware, bottle cap or other foreign
object has fallen into the disposer
Remove the splash guard* and remove
WKHREMHFWZLWKORQJKDQGOHGWRQJV
Replace the splash guard*.
Disposer does not
start
Reset button has been tripped With the splash guard* removed, check
to see if the turntable will move freely
using a broom handle. If the turntable
moves freely, replace the splash guard*
and check the reset button to see if it
KDVEHHQWULSSHG7KHUHVHWEXWWRQLV
red and located opposite the discharge
elbow, near the bottom of the disposer.
3XVKWKHEXWWRQLQXQWLOLWFOLFNVDQG
remains depressed. If the reset button
has not been tripped, check for a
shorted or broken wire connecting to
the disposer. Check the electrical power
switch, fuse box or circuit breaker.
If wiring and electrical components
are intact, the unit may have internal
problems that require service or
replacement.
Turntable cannot rotate. If the turntable does not turn freely,
FKHFNIRUDQREMHFWORGJHGEHWZHHQWKH
WXUQWDEOHDQGWKHJULQGULQJ'LVORGJH
WKHREMHFWE\PRYLQJWKHWXUQWDEOHZLWK
DEURRPKDQGOH7KHQUHPRYHWKH
REMHFW
,IQRIRUHLJQREMHFWLVSUHVHQWWKHUH
may be internal problems.
Disposer leaks If the leak is at the top, it may be caused
by:
1. Improper seating of sink flange (gasket
choice, putty, or tightening.
2. Support ring not tightened properly.
3. Defective cushion mount.
If the leak is at the discharge elbow, leak
may be caused by improper tightening of
elbow flange screws.
TROUBLESHOOTING TIPS
Troubleshooting Tips... Before you call for service
Save time and money! Review the charts below first and you may not need to call for service.
SAFETY NOTE: Before investigating, you must disconnect the power supply.
WARNING
Before resetting, disconnect the power supply-please see SAFETY NOTE
above. The overload control prevents the motor from operating should overloading occur.
This feature protects your house wiring and your disposer. When overloaded, the motor
will stop automatically.
Reset Button
Serial No.
Remove
Splash Guard
7XUQWDEOH
%DWFK)HHGGRHVQRWLQFOXGHVSODVKJXDUG
Loading ...
Loading ...
Loading ...