Loading ...
Loading ...
Loading ...
English
English
17
Operation
NOTE
• If excessive force is applied to a brush or
foreign matter is caught in the spinning
brush (drum), the brush may stop working
to protect the motor or vacuum. Turn the
vacuum off, remove the foreign matter, and
then turn the vacuum on. If the vacuum
does not start, turn it off and then on again.
• Static electricity may occur depending on
the humidity, temperature, or floor material,
etc. in your home. If it happens repeatedly,
contact a Samsung service center.
• Please charge the battery fully:
- Before using a newly purchased battery
for the first time or if you haven’t used the
battery for a long time.
- When the battery level indicator is on the
lowest indication and blinks.
• If you are not going to use the vacuum for
a long period of time or you’re going to be
away from home for a long period of time,
unplug the wall mount, and then detach
the wall mount from the battery. When the
battery is not being charged and not being
used, it will slowly discharge.
• When the battery level is low, recharge
it. If the level of the battery remains low
for a long period of time, it can cause the
performance of the battery to degrade.
CAUTION
• When the spinning brush (drum) inside a
brush is working, do not touch the brush.
- Otherwise, your hand can be caught and it
may cause an injury.
• Do not use the vacuum cleaner on items
that can be scratched (TV and monitor
screens, etc.)
Maintenance
NOTE
• Sometimes the wheel of a brush can scratch
the floor. Before using the vacuum cleaner,
check the status of the wheels of the brush.
- If there is foreign matter on the wheel of
the brush which cannot be removed easily,
contact a Samsung service center.
CAUTION
• Storing the vacuum cleaner in sunlight for
long hours may cause parts of the vacuum
to deform or discolor. Therefore, after
cleaning the parts of the vacuum cleaner,
dry them in the shade.
• Do not clean the brush of the vacuum
cleaner with water. Cleaning it with water
can cause the brush to deform or discolor.
• Before cleaning the wall mount, you must
unplug the wall mount.
• If you notice a continuous reduction in
suction or the vacuum cleaner overheats
abnormally, replace the fine dust filter.
• After cleaning <a dustbin>, <a metal mesh
grille filter>, or <a washable micro filter>
with water, dry in the shade.
- When heat is applied, product malformation
may occur.
Notes and cautions
02. VS6700AL_DJ68-00861C_EN.indd 1702. VS6700AL_DJ68-00861C_EN.indd 17 2021-02-03 �� 3:12:552021-02-03 �� 3:12:55
Loading ...
Loading ...
Loading ...